Thursday, May 9, 2013

Cisco: Advanced Level

Blog Sections:

This section is the review material consisting of labs which should be solved in 10 minutes or less. It also contains questions regarding particular technology.
List of OSPF Labs

Problem 01 | Problem 02 | Problem 03 | Problem 04 | Problem 05
Problem 06 | Problem 07 | Problem 08 | Problem 09 | Problem 10
Problem 11 | Problem 12 | Problem 13 | Problem 14 | Problem 15
Problem 16 | Problem 17 | Problem 18 | Problem 19 | Problem 20
Problem 21 | Problem 22 | Problem 23 | Problem 24 | Problem 25
Problem 26 | Problem 27 | Problem 28 | Problem 29 | Problem 30
Problem 31 | Problem 32 | Problem 33 | Problem 34 | Problem 35
The startup configuration can be downloaded here. Alternatively, you can configure these devices based the the topology diagram presented below (not such a bad idea). The physical topology for this and other labs can be found on the main page. If you want to download it the save the content of the link below (I don't have GNS3 only Dynagen format):
Download: topology diagrams and .net map.
Here’s your layer 2 Topology diagram. Click on image to enlarge it.
Layer 2 Topology Diagram.
Layer 3 Topology Diagram.


Your Feedback
If you find these labs useful, I would appreciate your feedback. Please send me an email as per following: 

Address: linuxed.jr at gmail.com
Subject: ten minute lab
Answers to the following questions:

1. Would you be interested in receiving answers to the TEN MINUTE LABS?
[yes/no]

2. If 'yes' to the first question: what format of the answers would you be interested in?
a) videos on youtube
b) this blog
c) both
d) other: (provide the format)

Thank you for your time.